defined

Liberty as Wilderness

I have written many times in the past on how much I dislike State Parks and State Campgrounds. I dislike the high degree of enforcement, the rules and regulations, and the number of people that are crowded into a small area. I much prefer to be alone and make my own rules, limited only by a basic respect for the natural world around me.

Deer

I have never viewed wilderness as a fixed or pure landscape. There is no pure wilderness for me, no set of clear definations, except for the need to be fairly remote, fairly private, fairly free from the big government enforcement precence. Certainly, a scenic view is nice, and quiet from passing traffic is great, but it’s not everything.

Fulton Chain of Lakes

Liberty should be the primary goal in wilderness. Wilderness is a place with the fewest regulations and rules possible, the farthest place possible from an enforcement precence. I just like to be myself, spend time in the woods, observing nature, and doing things on my own pace, without the regulations or control of the government.

Land Use Classifications in Adirondack Forest Preserve

These definations are from the Adirondack Park State Land Master Plan.

‘ ?>


View Larger Map ‘ ?>

Wild Forest.

A wild forest area is an area where the resources permit a somewhat higher degree of human use than in wilderness, primitive or canoe areas, while retaining an essentially wild character. A wild forest area is further defined as an area that frequently lacks the sense of remoteness of wilderness, primitive or canoe areas and that permits a wide variety of outdoor recreation.

Towards Indian Lake

To the extent that state lands classified as wild forest were given or devised to the state for silvicultural or wildlife management purposes pursuant to statutory provisions specifying that these lands will not form part of the forest preserve (if such provisions are constitutional), the following guidelines are not to be interpreted to prevent silvicultural or wildlife management practices on these lands, provided that other guidelines for wild forest land are respected.

Those areas classified as wild forest are generally less fragile, ecologically, than the wilderness and primitive areas. Because the resources of these areas can withstand more human impact, these areas should accommodate much of the future use of the Adirondack forest preserve. The scenic attributes and the variety of uses to which these areas lend themselves provide a challenge to the recreation planner. Within constitutional constraints, those types of outdoor recreation that afford enjoyment without destroying the wild forest character or natural resource quality should be encouraged.

Many of these areas are under-utilized. For example the crescent of wild forest areas from Lewis County south and east through Old Forge, southern Hamilton and northern Fulton Counties and north and east to the Lake George vicinity can and should afford extensive outdoor recreation readily accessible from the primary east-west transportation and population axis of New York State.

Snowy Mountain

Wilderness.

A wilderness area, in contrast with those areas where man and his own works dominate the landscape, is an area where the earth and its community of life are untrammeled by man–where man himself is a visitor who does not remain.

A wilderness area is further defined to mean an area of state land or water having a primeval character, without significant improvement or permanent human habitation, which is protected and managed so as to preserve, enhance and restore, where necessary, its natural conditions, and which:

(1) generally appears to have been affected primarily by the forces of nature, with the imprint of man’s work substantially unnoticeable;

(2) has outstanding opportunities for solitude or a primitive and unconfined type of recreation;

(3) has at least ten thousand acres of contiguous land and water or is of sufficient size and character as to make practicable its preservation and use in an unimpaired condition; and (4) may also contain ecological, geological or other features of scientific, educational, scenic or historical value.

Crane Pond from Pharaoh Mountain

Significant portions of the state lands within the Park are in a wilderness or near-wilderness condition today. These areas constitute nearly 20% of all designated federal and state wilderness east of the Rocky Mountains and 85% of the designated wilderness in the eleven northeastern states. At the time of the original enactment of this master plan, a majority of these areas contained some structures and improvements or were subjected to uses by the public or by official personnel that were incompatible with wilderness. However, the extent of these non-conforming uses was very modest from the standpoint of the total acreage involved. Since 1972 all but a few of those non-conforming uses have been removed by the Department of Environmental Conservation.

Gothics

Primative Area.

A primitive area is an area of land or water that is either:

1. Essentially wilderness in character but, (a) contains structures, improvements, or uses that are inconsistent with wilderness, as defined, and whose removal, though a long term objective, cannot be provided for by a fixed deadline, and/or, (b) contains, or is contiguous to, private lands that are of a size and influence to prevent wilderness designation; or,

2. Of a size and character not meeting wilderness standards, but where the fragility of the resource or other factors require wilderness management.

Northeast Tip

The definition recognizes two basic types of primitive areas: (i) where the ultimate goal is clearly to upgrade the area to wilderness at some future time, however distant, when the non-conforming uses can be removed and/or acquisition of private tracts is accomplished, and, (ii) where eventual wilderness classification is impossible or extremely unlikely.

An example of the first type would be the existence of a fire tower and associated structures and improvements (observer cabins, telephone lines, etc.) whose precise date of removal cannot be ascertained until the new aerial surveillance program of the Department of Environmental Conservation is fully implemented and communication systems modernized. Another example would be a private or minor public road traversing a tract otherwise suitable for wilderness designation or separating such an area from a designated wilderness. Finally, an extensive private inholding or a series of smaller private inholdings whose eventual acquisition is desirable but cannot now be provided for, might so affect a potential wilderness area as to require primitive designation.

Lows Ledge

The second type includes smaller tracts that are most unlikely to attain wilderness standards, such as a small island in close proximity to a highly developed shoreline, or larger tracts with non-conforming uses, such as a railroad or major public highway, that are essentially permanent, but where in each case the high quality or fragility of the resource requires wilderness management.

The definition recognizes two basic types of primitive areas: (i) where the ultimate goal is clearly to upgrade the area to wilderness at some future time, however distant, when the non-conforming uses can be removed and/or acquisition of private tracts is accomplished, and, (ii) where eventual wilderness classification is impossible or extremely unlikely.

Wakley Fire Tower

An example of the first type would be the existence of a fire tower and associated structures and improvements (observer cabins, telephone lines, etc.) whose precise date of removal cannot be ascertained until the new aerial surveillance program of the Department of Environmental Conservation is fully implemented and communication systems modernized. Another example would be a private or minor public road traversing a tract otherwise suitable for wilderness designation or separating such an area from a designated wilderness. Finally, an extensive private inholding or a series of smaller private inholdings whose eventual acquisition is desirable but cannot now be provided for, might so affect a potential wilderness area as to require primitive designation.

The second type includes smaller tracts that are most unlikely to attain wilderness standards, such as a small island in close proximity to a highly developed shoreline, or larger tracts with non-conforming uses, such as a railroad or major public highway, that are essentially permanent, but where in each case the high quality or fragility of the resource requires wilderness management.

Lows Ledge

Canoe Area.

A canoe area is an area where the watercourses or the number and proximity of lakes and ponds make possible a remote and unconfined type of water-oriented recreation in an essentially wilderness setting.

The terrain associated with parcels meeting the above definition is generally ideally suited to ski touring and snowshoeing in the winter months.

Long Pond Entrance

What is a Watt?

Many people in our country are ignorant about electricity and the consumption of energy, even though they spend a significant amount of money purchasing electricity. Today I hope to shed a bit of light on this important issue.

Blogging Tool

Measuring Energy Consumed.

A watt is a precise measure of energy consumed to do a task. It is similar to horsepower and kilowatts, which are used to calculate larger amounts of energy consumed. There are:

  • Approximately 750 watts per each horsepower
  • Exactly 1,000 watts per kilowatt

Every appliance tells you how much electricity, under peak use, is consumed to make it work. A light bulb might consume 100 watts, an electric hair drier might consume 1100 watts of energy. This information can be used to compare the efficiency of similar devices, and how much it will cost you to use the device.

Solar

The Kilowatt Hour.

Many of us who carefully read our electricity bill will notice that the rate we pay is based on a connection charge around $17 a month plus the number of kilowatt hours consumed. A kilowatt hour (Kw/h) is:

  • An average of 1,000 watts consumed over an hour

If you had only one appliance in your house, a 100 watt light bulb left on constantly, then your electric bill would state you have consumed 73 Kw/h of electricity over the month. There are on average, 730 hours of time per month.

  • Convert 100 watts to kilowatts equals 0.1 kilowatts
  • 0.1 kilowatts times 730 hours equals 73 Kw/h of electricity.

Few people leave 100 watt light bulbs turned on 24 hours a day, 7 days a week in a month. Most of us turn lights and appliances on and off, and unplug them from the wall when they are not being used. Therefore, to understand how much electricity you really are using you must calculate the time an appliance is being used over a month.

A clothing iron might use 1,100 watts of power when the heating element is on, as indicated by the red light on the iron. An iron might have it’s heating element on about half the time it is plugged in. If you iron your shirts and pants 7 days a week, 5 minutes a day, that is 35 minutes a week. As the iron is only on half of that time, it’s consuming power 15 minutes a week.

Therefore, your electric use for ironing your clothes would equal:

  • 0.833333 hour a day times 30.4 days times 1.1 kilowatt equals 2.8Kw/h

Few of us are are that crazy about ironing, but that gives you an idea of the electricity consumed by your iron if you where to use it that much. Being concerned about energy use, you purchased a 26 watt compact florescent light bulb that is on 4 hours a day. Believe it or not, in a month a compact florescent light will consume more energy, because it’s used far more in a day, despite it’s much lower wattage.

  • 4 hours a day times 30.4 days times 0.026 kilowatt equals 3.16 Kw/h

Therefore, despite the fact the 26 watt compact florescent bulb is used much less, because it on much longer, it’s energy consumption is much higher then that of the far greater wattage clothing iron. Replace it with a regular 100 watt light bulb and it would be four times higher.

  • 4 hours a day times 30.4 days times 0.1 kilowatt equals 12.6 Kw/h

Heating appliances consume the most electricity, followed by cooling appliances, large motors, then small loads like electronics and lighting. Your light bulbs and clothes iron are probably one of the smallest consumers of electricity in your house, especially if not left on for long hours. Other sources add up to much more quickly.

Wind Turbine Power Shut Off

What You Pay.

Everybody is charged about $17 a month for the privilege of being connected to the electrical grid. On top that you are charged per kilowatt hour for a variety of fees, that add up to about 15.5 cents per kilowatt/hour consumed. Depending on how many kilowatt hours you consume, it can add up be a significant amount of money.

The cost of the clothing iron’s electricity would be about 44 cents a month. The compact florescent will cost you 49 cents a month versus the regular light bulb at $1.95 a month. Indeed, as this shows in New York, a 26 watt compact florescent bulb can easily pay itself back in a month and a half. Remember, however your biggest electricity consumers are those devices that are high wattage and used a long time.

It is most worthwhile to consider upgrading older appliances in your house, such as electric hot water heaters and refrigerators. It’s possible with New York State’s electricity cost, that your pay back in energy savings would be less then a years’ time.

Wind Turbine Power Shut Off

What The Environment Pays.

It takes close to pound of coal to produce a kilowatt hour of electricity. That coal had to be removed from the earth by blasting off mountain tops, or sending miners into dangerous mines subject to collapse. For every megawatt or 1,000 kilowatts of energy produced it takes 1/2 ton of coal to be mined, causes 6 pounds of sulfur dioxide to be released into the environment, and over one ton of carbon dioxide to be released.

That’s a lot of resources and pollution just to make your light come on. While many of our New York power sources are cleaner then coal, all of them have significant environmental impacts. Dirtier sources of power can be utilized less with less demand. Power plants can usually reduce their output and consumption of resources when there is less of a demand for their services. Breathe easier by using less electricity.

Think About Energy.

Think about energy. It matters. Energy production is one of the greatest polluters in our country, and if we all choose to find ways to consume less electricity, we will have less pollution. Energy is also one of our biggest expenses, so if you find ways to conserve, you can save real money these days.